HEX Pixhawk2.1 power module adapter For PIXHAWK APM PIX 3S to 6S battery HX4-06008
The original power module of pixhawk2.1 can only support 30A stable current (100A instant current) of 8S battery or less.
The original power module of pixhawk2.1 can only support 30A stable current (100A instant current) of 8S battery or less.
This sensor hub is to connect two current sensors in parallel. The current of both sensors will be summarized and passed to the FC. The voltage measurement of the Lipo packs will be collected from both sensors and passed through the Hub to the FC.
Centimeter‑level GNSS positioning for the mass market
– Integrated Real Time Kinematics (RTK) for fast time‑to‑market
Brand new design on copter arms. Better aerodynamics provided by the drop-shaped structure.
The new drop-shaped arm structure is more in line with the aerodynamic principle, and the flight is smoother!
Supports multiple modes such as Loitering, Altitude Hold, mode (with Waypoints), following mode, etc
All in one: Telemetry, Video, and control
*Up to 20KM in FCC mode and 12KM in CE mode
*2.4Ghz frequency
*UART Telemetry
*RC Protocol: SBUS, iBUS, ETC.
The Cube Orange+ Standard Set features a high-performance H7 processor and the 1090MHz ADS-B receiver from uAvionix.
Built in ultra small LiDAR module CAN Protocol, which provide more reliable communication IMU Module PMW3901 Optical Flow Sensor. Effective ranges from 80 mm to infinity.
The LTE 4G network data transmission and image transmission integrated link developed by CUAV can be connected to the CUAVCloud system